Glow in the Dark Alum Crystal Materials
- fluorescent highlighter pen (I used yellow, but you can use another color for different colored glowing crystals. Check to make certain the highligher will glow under an ultraviolet or black light. Pretty much all yellow highlighers glow, as do most other colors. Many blue pens will not glow.)
- alum (sold as a pickling spice)
Grow Glowing Alum Crystals
- Carefully cut open the highlighter and remove the strip that contains the ink. You may want to wear gloves, since highlighter can stain your fingers.
- Pour 1/2 cup of hot tap water into a clean container.
- Squeeze the highlighter strip into the water to color it with the fluorescent ink. Discard the ink strip when you are finished.
- Slowly stir in alum, a little at a time, until it stops dissolving.
- Loosely cover the jar with a coffee filter or paper towel (to keep dust out) and allow the jar to sit undisturbed overnight.
- The next day, you should see small alum crystals at the bottom of the container. If you don't see crystals, allow more time. You can let these crystals grow, though they will conpete with each other for material. Alternatively, you can use one of these crystals to grow a large single crystal.
Growing a Large Single Crystal
- If crystals are present, pour the alum solution into a clean jar. Collect the small crystals, which are called seed crystals.
- Tie nylon line around the largest, best-shaped crystal. Tie the other end to a flat object (e.g., popsicle stick, ruler, pencil, butter knife). You will hang the seed crystal by this flat object into the jar far enough so that it will be covered in liquid, but won't touch the bottom or sides of the jar. It may take a few tries to get the length just right.)
- When you have the right string length, hang the seed crystal in the jar with the alum solution. Cover it with the coffee filter and grow a crystal.
- Grow your crystal until you are satisfied with it. If you see crystals starting to grow on the sides or bottom of your jar, carefully remove your crystal, pour the liquid into the clean jar, and put the crystal in the new jar.
Making the Crystal GlowWhen you are satisfied with your crystal, remove it from the crystal growing solution and allow it to dry. Just shine a black light (ultraviolet light) on the crystal to make it glow. Depending on the ink you used, the crystal may glow under fluorescent light or sunlight.
You can display your crystal or store it. You can wipe dust from a display crystal using a cloth, but avoid dampening it with water or else you will dissolve part of your crystal. Crystals kept in storage may be wrapped in paper for added protection from dust and changed in temperature and humidity.