Lichtenberg figures are branching structures formed from an electrical discharge on or inside of an insulator. The structures take their name from Georg Christoph Lichtenberg, the physicist who discovered and studied them.
One way to make your own Lichtenberg figure is using polyethylene sheets and talcum powder. There is an easier method you may wish to try:
Lichtenberg Figure Materials
- sharp metal object (e.g., awl)
- insulator (e.g., sheet of acrylic)
- photocopier toner
- Position the metal object so that only its tip is touching the surface of the insulator.
- If you have a Wimshurst machine or Van de Graaff generator handy, discharge it through the metal point into the acrylic. (Gray Matter has a cool video of what happens if you use a particle accelerator to create the Lichtenberg figure. Note that the hammer is insulated, thus preventing that person's skin from displaying a Lichtenberg figure. Be careful!)
- If you don't have a machine, you'll have to generate static electricity another way, like by dragging your feet through a shag carpet and zapping yourself on the metal object... fun!
- In either case, you will create a Lichtenberg figure across the surface of the acrylic, radiating outward from the metal point. However, you probably won't be able to see it. If you (carefully) blow toner powder across the surface of the acrylic, the Lichtenberg figure will be revealed.
Candy Triboluminescence | Plasma - States of Matter
Photo: This Lichtenberg figure was made by shooting a beam of electrons (~2.2 million volts) through an insulator. The pattern is illuminated by blue LEDs. (Bert Hickman, Wikipedia Commons)